TOURANTRAFFIC
Intelligent traffic lights controller.

Intelligent traffic lights controller.

Brief Introduction

Central coordinate controller modularity international communication protocol hand-heldterminal Max. 112 output meet the standard of GB2528-2010 Road Way Traffic Coordinate Controller.

Product Details

Swipe to see full table

Model

TR-TLC2000

Description

Central coordinate controller modularity international communication protocol hand-heldterminal Max. 112 output meet the standard of GB2528-2010 Road Way Traffic Coordinate Controller

Interface

Laptop/mobile phone/pad

Overview

Central coordinate controller TR-TLC2000 adopts hardware modular design concept with cordwood system for expension. Software platform uses the embedded Linux operation system which is stable and reliable. Build-in induction and half induction control algorithm greatly improve the traffic capacity at intersections. Annunciator follows follows the standard GB2528-2010 Road Traffic Signal Control Machine. The communication protocol between PC and annunciator follows the standards of GB/T 20999-2007 communication protocol between traffic signal control machine and PC, which can be compatible with other systems using the same standard. It is good for system integration and extension. The communication protocol between annunciator and countdown counter follows GA/T 508-2004 Road Traffic Signal Countdown Display which can communicatewith the countdown counter having the same protocol.

Main Functions

Coordinated control together with command center by networking (control in line or lay)

Lineless coordination control

Multi-time control

Sensor conrol

Manual phase stepping control

Pedestrian crossing trigger control

On-board wireless special control

Holding wire/wireless control

Traffic parameter acquisition

Fault detection and alarm

Fault degraded running

Yellow flash for hardware failure

Overvoltage protectioin

Input & Output Interface

Signal light output: 56, expandable to 112, SCR output, single drive capability, AC220V/3A;

Vehicle detection input: 36, dry contact or OC transistor output;

Communication interface: Standard EIA

Level RS232 interface: 3, baud rate: 1200bps—115200 bps

RS485 level signal interface: 1, for countdown counter communiation

Network interface: 1, 10M/100M self-adaption

GPS interface: 1, can reeive GPS time service (optional)

Pedestrian request interface: 2, dry contact signal

Characteristic Parameter

Numbers of pre-setable time base dispatch table: 40

Numbers of pre-setable time table: 16, numbers of pre-setable times in each time table: 48

Numbers of pre-setable plans: 32

Numbers of pre-setable section table: 16, numbers of pre-setable times in each time table: 16

Numbers of pre-setable phase: 24

Max. time of red, yellow, green light: 225s

Fault Detection

Green conflict fault detection

Fault of all red light extinguishing in one signal light group

Fault of red light and green light set on at the same time in one group

Detection of light working voltage and working current

Detection of communication fault

Mechanical Property

Dimession:1280×600×440mm(H×W×D)

Weight:40kg

Enclosure protection class:IP54

Electrical Performance

Voltage: Single phase AC220V±20% 50Hz

No-load power consumption: 20W

Insulation resistance between AC input end and box is more than 10MΩ

Environment Index

Working condition:-20℃--+70℃

Storage condition:-40℃--+80℃

Humidity:5%--95%,40℃ non-condesing

Impact:10g/16ms,half sinusoid ,100 times

Vibration:5-33Hz,1g/1h, tow-ways: 2.5m

Reliability

MTBF>10000hr.

Maintenance

MTTR≤0.5hr.

Installation

Floor type

Installation Dimenssion

 

Accesories

User Manual×1

Key 6

Protectve tube×5

Tagboar×1

Certification×1

Share:

Online Inquiry