Plastic Road Stud TR-RS-P90 Type





Brief Introduction
An extremely robust plastic road stud made of ABS material is ideal for roads where it will frequently be driven over by heavy traffic. Its use is also recommended on soft asphalt or in very high ambient temperatures. Ribbing on the underside of the road stud strengthens the structure of the body. This enables it to best spread pressure onto the substructure and increases adhesion when the markers are stuck down.
Product Details
Product Name: Plastic Road Stud, TR-RS-P90 Type
Specification: Meets GB, ASTM, EN standard requirements,
Material: ABS Plastic body, Acrylic Lens,
Colours: White, Yellow, Orange, Red, Blue, Green;
Dimension: 116*81*18mm,
Weight: 90g min.
Brief Description:
An extremely robust plastic road stud made of ABS material is ideal for roads where it will frequently be driven over by heavy traffic. Its use is also recommended on soft asphalt or in very high ambient temperatures. Ribbing on the underside of the road stud strengthens the structure of the body. This enables it to best spread pressure onto the substructure and increases adhesion when the markers are stuck down.
|
Obs Angle |
Hor. Entr. Angle |
White |
Yellow |
Red |
|
0.2° |
0° |
280 |
165 |
68 |
|
0.2° |
20° |
120 |
70 |
30 |
According to GB/T24725 standard

Technical Data





Plastic Road Stud TR-RS-P90 Type
Brief Introduction
An extremely robust plastic road stud made of ABS material is ideal for roads where it will frequently be driven over by heavy traffic. Its use is also recommended on soft asphalt or in very high ambient temperatures. Ribbing on the underside of the road stud strengthens the structure of the body. This enables it to best spread pressure onto the substructure and increases adhesion when the markers are stuck down.
Product Details
Product Name: Plastic Road Stud, TR-RS-P90 Type
Specification: Meets GB, ASTM, EN standard requirements,
Material: ABS Plastic body, Acrylic Lens,
Colours: White, Yellow, Orange, Red, Blue, Green;
Dimension: 116*81*18mm,
Weight: 90g min.
Brief Description:
An extremely robust plastic road stud made of ABS material is ideal for roads where it will frequently be driven over by heavy traffic. Its use is also recommended on soft asphalt or in very high ambient temperatures. Ribbing on the underside of the road stud strengthens the structure of the body. This enables it to best spread pressure onto the substructure and increases adhesion when the markers are stuck down.
According to GB/T24725 standard

Swipe to see full table
|
Obs Angle |
Hor. Entr. Angle |
White |
Yellow |
Red |
|
0.2° |
0° |
280 |
165 |
68 |
|
0.2° |
20° |
120 |
70 |
30 |
Online Inquiry

