Aluminum solar road stud

Aluminum solar road stud

 

Key Features:

Flexible solar panel,

20ton compression resistance.

Larger solar charging area.

Anti-impact and IP68 design for reflector.

 

Installation:

1. Before installation, solar road studs shall be charged under sunlight for 1 hr, to check the studs can work normally.

2. Placing security isolation facilities for installation work is most important and must not be ignored. In the whole process of dynamic construction, no matter in an new closed road or a running road, every installers shall be in the isolation area. If in a running road, the ratio between security personnel and the installing personnel shall be 1:1; If in a closed road, 1:3.  

3. Locate the installing position and ensure it is flat. For curving, cracked or uneven pavement, straighten it prior to installation.

4. Clean the installation location with a brush, meanwhile ensure the location is dry.

5. Glue the road stud thoroughly with proper amount of epoxy glue.

6. Firmly mount the stud on the fixing location & ensure the reflective part is facing the right traffic direction. Do clean the spilled epoxy glue if excessive amount is used.

7. Inspect the installed studs within 2hrs after installation, ensuring that all the studs are fixed in correct direction or not crooked.

8. Remove the isolation facilities in 4hrs after the stud’s installing glue is thoroughly cured.

 

Application:

• Road Delineation

• Accident black-spots / cluster sites

• Hazardous road layouts

• Areas adversely affected by poor visibility

• Cycle path

• Car parks

 

Packing Information

 42.5*23.5*24cm  GW: 460g/pc  NW: 420g/pc  48pcs/carton

 

Technical data

Size	125x105x25mm
Net Weight	0.42kg
Material	Aluminum alloy shell+Polycarbonate+epoxy filler
LED	φ5mm, one-way 2pcs or 3pcs, two-way 4pcs or 6pcs
LED Working Mode	Steady or Flash (2HZ or upon request)
Luminous intensity	5000mcd
View distance	over 500m
Color	Red/Yellow/White/Blue/Green
Solar Panel	Flexible solar panel 2V 120MA
Battery	NI-MH battery /1.2V 1200MAH
Battery Life span	More than 3 years
Charge time	8 hours @100 Klux(sunny day)
Working time	72 hours
Activation	photo sensor
Starting intensity	500Lux
Compression resistance	over 20 tons
Working temperature	-20℃～+70℃
Ingress Protection	IP68
Warranty	One year