BS3262 Standard Thermoplastic Road Marking Paint White/Yellow

Summarization:  

It is a kind of long lifespan thermoplastic road marking materials manufactured to BS3262 standard, but it is different from other standards on the contents of compositions. Its composition specification and physical technical data are as below:

Application and film thickness:

Application requires the skills of trained personnel and specialized equipment. It is applied by spraying/screed/extrusion method, even by hand scraper. The material is heated to an application temperature of 180°C to 200°C with a maximum temperature of 230°C. General marking thickness is 1.5-3.0mm (recommended thickness 2.0mm), consumption per square meter is about 3-5kgs according to different application method,thickness and situation of road surface.

Application of Glass Beads:

It is important that the specified film thickness is achieved in order to maximise glass bead retention and the wearing properties of the marking.

• drop-on glass beads should comply with required standard, applied at the rate of 0.3~0.4kg per sq. meter, require a dry film thickness of 1.8 mm for optimum retroreflectivity. It can be applied at a film build of 1.5~3.0mm.

• To ensure maximum bead adhesion retention, the beads must be applied immediately after spraying on surface of road, then the marking needs to be protected from traffic until it dries.

Surface Preparation:

The road surface to be painted must be dry and free of any grease, oil, dirt, gravel, flaking pavement materials and any loose foreign material. The temperature of the surface should be above 10°C. If the surface has been previously marked or treated (such as the application of curing compounds with concrete) then a compatibility check should be carried out to establish if any surface preparation is necessary. The use of Primer has proven to be successful as a priming coat on surfaces where thermoplastic road marking Paint has experienced adhesion.

Transport:

Thermoplastic Road Marking Paint is not classed as dangerous goods by Chinese Testing and Technical center for dangerous goods and packing(DPTC) by Road or Railway or Ocean.

Storage:

Store under cover in a dry, cool, ventilation area, protected from moisture. Stock should be rotated and used within 12 months from the date of manufacture. Improper storage environment may lead to undesirable condition, such as changes in color, serious hardening and other problems.

Packaging:

25kg compond-plastic bag (General bag) or PE melted bags(Customized bag)

Additional Information:

Our thermoplastic road Marking paint is produced by automatic intelligent production line, due to accurate ratio of raw material, all-round uniform mixing, intelligent running and management in whole process, automatically abnormal quality indication at multi-node, to ensure produced thermoplastic paint with excellent internal quality. Has following features:

Excellent adhesive property, stability and long-term reflective ability.

Excellent anti-micro-cracking performance and weather resistance ability

Excellent application performance: Fast dry, good flow property, and has good anti-skid performance.

Please contact with us if you require:

• Pricing and availability

• Or more specific information on this product or other products in the wide range of products manufactured by us.

Above statements, technical information and recommendations contained herein is based on our present knowledge. It is intended to furnish general remarks on our products and their application. Therefore, the information should neither be taken literally nor as a guarantee for special characteristics of products or useful fields of application, and it implies no liability or other legal responsibility on our part,. We reserve the right to make any changes according to technological progress. If you have any questions or doubts please don’t hesitate to contact with us.